The Best Battery Protection Circuit Board For E-Scooter

By Customer Ratings

1
Image
Flipsky Battery Protection Circuit Board For E-Scooter - Prevents Battery From Overchargin... Read Review

View More Articles

Product Highlights

  • Automatically stops charging at full charge
  • Lowers the risk of sparks or fire in the event of a crash
  • Keeps your battery safe and extends its lifespan

2
Image
Victron Energy Battery Protect 12/24-Volt 65 amp Read Review

View at Amazon

Product Highlights

  • The Battery Protect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine
  • Maximum continuous load current 65 amp and Peak current (during 30 seconds) 250 amp
  • 12/24-Volt auto ranging - The Battery Protect automatically detects system voltage
  • The Battery Protect can be set to engage / disengage at several different voltages, the seven segment display will indicate which setting has been chosen
  • Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
3
Image
4Pcs 2A USB 18650 Lithium Li-ion Battery Charger Module Boost 3.7V to 5V 9V 12V Adjustable... Read Review

View at Amazon

Product Highlights

  • ✔ High quality micro USB Lithium Li-ion Lipo Battery Charger Module 3.7v 4.2v Boost Step Up 5V 9V 12V
  • ✔ These lithium ion charger 18650 module can be used for multimeter, converted to lithium battery charging
  • ✔ Input Voltage: 4.5V-8V DC, Output Voltage: 4.3V-27V DC; Charging Voltage: 4.2V DC
  • ✔ Output Current: 5V 1.4A; 9V 0.8A; 12V 0.6A, Charging voltage: 4.2V DC, Charging current: Max 1A, Discharging current: Max. 2A
  • ✔ Package Includes: 4 Pcs USB lithium battery charger module
4
Image
ACEIRMC 1S 3.7V 10A 6MOS 18650 Charger PCB BMS Protection Board for 18650 Li-ion Lithium L... Read Review

View at Amazon

Product Highlights

  • Over charging protection, over discharge protection, short circuit protection, over current protection function.
  • Protection voltage range: 2.5V-4.2V.
  • The protection board is for 1S Li-ion/Li-Polymer battery cell.
  • Charging connector and discharging connector are the same(P+, P-).
  • ATTENTION: Strictly according to the diagram wiring: B+: connected battery positive, B-: connect to battery negative, P+:battery output input positive, P-:battery output input negative, Otherwise it will cause damage to the chip.
5
Image
Weewooday DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect Sw... Read Review

View at Amazon

Product Highlights

  • Specific information: the supply voltage is DC 12V-36V, the output voltage is equal to the supply voltage, this voltage protection module could control the voltage within 0.1V
  • Main functions: this digital low voltage protector is functional and practical, contains various functions, over charge protection, over discharge protection function, short circuit protection function, over current protection function
  • Diverse usages: these disconnect over discharge protection modules are suitable for a variety of batteries and lithium batteries, a wide range of applications, when the battery is under voltage loss or low battery, it will be automatically disconnected
  • LED screen display: designed with led screen display in digital way, which can allow you easily read the output voltage and stetting parameters, the voltage can be set within 12-36V as you like
  • Discharge protection for batteries: when the voltage of battery has reached the setting voltages, this over discharge protection module will disconnect the load automatically to avoid the battery from over discharging to prolong the its service life
6
Image
54.6V 2A Power Supply Adapter Charger for 48V 13S Li-ion Lithium Battery Pack 5.5x2.1mm Ro... Read Review

View at Amazon

Product Highlights

  • Input: AC 100-240V, 1.5A; Output: 54.6V 2A.
  • 5.5*2.1mm DC Plug connector with a 5.5*2.5mm tip ; Special charger for 48v 13S lithium battery pack.
  • The charger Built-in simply fan, with radiating fin surrounding the board, dissipating the heat through the shell, so some hot on the shell when charging is very normal, but it is durable.
  • The Charger protected: Short circuit protection/ over current protection/ over voltage protection; red light -- charging, green light -- charged fully, it stop automatically when the battery is full.
  • Durable to Use: Made of High Quality Material, Durable to Use.
7
Image
ALAMSCN TP4056 Type-C USB 5V 1A 18650 Lithium Battery Charger Module Li-ion Charging Board... Read Review

View at Amazon

Product Highlights

  • The input terminal has a Type-c USB female socket, which can be directly used as an input to charge the lithium battery with a mobile phone charger.
  • There are solder joints for input voltage wiring, which is convenient for DIY.
  • Two-in-one charging and discharging protection function.
  • No load the light not bright, red light for recharging, is full of green light.
  • Note: When the battery is connected for the first time, the protection circuit can be activated by charging it with 5V voltage.
8
Image
Li-Ion Battery Storage Box 3x7 18650 Holder for Uninterrupted Power Supply UPS DIY Battery... Read Review

View at Amazon

Product Highlights

  • Appearance size: 65*94*150mm
  • Internal dimensions: 60*80*146mm .can hold 21 pcs 18650
  • This kit does not include batteries
9
Image
ALAMSCN 2S 7.4V 8.4V 8A 18650 Charger BMS Circuit PCB Protection Board for Li-ion Lithium... Read Review

View at Amazon

Product Highlights

  • Small Li-ion Lithium Battery charger protection module, can be used for 18650, ternary lithium, polymer lithium battery packs.
  • Overcharge protectionoverdischarge protectionshort circuit protectionovercurrent protection.
  • With spot welding design, easy to assemble, convenient to use in all your DIY portable projects.
  • The static power consumption is small, and the overall power consumption is less than 30uA.
  • NOTE: Strictly according to the diagram wiring, do not short-circuit intentionally; need to be charged before output; the internal resistance of battery capacity are closer will be better; do not mix the good battery and poor battery to use.
10
Image
KOOBOOK 5Pcs 18650 Li-ion Lithium PCB Protection Circuit Board 3.7V Battery Cell Protectio... Read Review

View at Amazon

Product Highlights

  • Apply to Lithium-ion battery,Lithium-polymer battery.
  • Maximum output current: 5A
  • Overcharge protection, over discharge protection, over current protection, short circuit protection.
  • PCB Board Diameter: approx 1.6cm/0.63"
  • Package Includes:PCB Protection Board with 1 Plastic Base and 1 Heat Shrinkable Tube.
11
Image
MakerFocus 4pcs 186 50 Battery Charger Protection Module,Power Bank PCB Module Board,Dual ... Read Review

View at Amazon

Product Highlights

  • ★ Designed for 186 50 battery DIY power bank: The battery of the 186 50 battery must be flat, and the length is 65MM. The pointed battery cannot be used. If you are using old batteries, different capacities, different brands are not available, the assembled battery is guaranteed to be at least 3.5V per voltage. If the voltage is too low, it will not be charged. (Note: It also support lithium battery, mobile phone battery and tablet battery ).
  • ★ Supported connection methods: It is possible to connect only one lithium battery or multiple lithium batteries in parallel. The capacity of connected battery is no more than 200,000 mA, As long as the battery with a voltage of 3.0-4.2V can be used.
  • ★ Charge indication of this power bank pcb board: The word "IN" will be shown in the display; Output indication: Long press the LED button after turning on the load, Start output, The word "OUT" and the current and voltage of 5.0V1.0A or 5.0V2.1A will be displayed in the display.
  • ★ This is a mobile powerbank module with Protection Function: The protection circuit of the boosted lithium battery has been integrated, prevent over-discharge, over-charge, overload short circuit protection, over current protection, and over temperature protection. ★ ★ ★ Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
  • ★ Why can't continue charging when charging capacity is 99%? You just assembled the battery, why the display percentage is not accurate, the battery power is only 50%, but it shows 80% after assembly?--Whether you are using a new battery or an old one all need to be discharged before use(charge your mobile phone), then turn it off charge it once gain. If it still cannot be solved, it is caused by large internal resistance and inconsistent capacity.
12
Image
Aideepen 5PCS 2S 10A BMS Lithium PCB Protection Boards 8.4V 7.4V 8.4V-9V PCM PCB Li-ion Li... Read Review

View at Amazon

Product Highlights

  • Included 5PCS 2S 10A PCB protection boards with balance function charger protect module（Short circuit protection: can be protected, need to charge recovery）
  • Charging voltage: 8.4V-9V
  • The Overcharge voltage range: 4.25-4.35v ± 0.05v
  • Overpressure voltage range: 2.5-3.0v ± 0.05v
  • The protection board couldn’t be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 775 (4A) motor, 1W fish eye LED light
13
Image
20 Pieces Charging Module Battery Charging Board with Battery Protection BMS 5V Micro USB... Read Review

View at Amazon

Product Highlights

  • What you receive: there are 20 pieces charging modules in our package, practical tools for you, which can also meet your various needs, enough for you to change and replace
  • Details: the charging board inputs with micro USB female, can be directly inputed to do with phone charger rechargeable battery, still retains the input voltage wiring pads, convenient for you to DIY; Charging cut-off voltage: 4.2V, max charge current: 1000 mA
  • Function introduction: input voltage is 5V, battery over-discharge protection voltage is 2.5V, battery over current protection current is 3A; Connect the battery to the B+ B-, inserted into the USB female mobile phone charger, the red light is being charged and the green light to full
  • Suitable occasion: the battery charging board is applied for single-cell lithium battery or multi-cell parallel lithium battery charging, and the charging port can be powered from USB, which are convenient for you to operate
  • Notice: please note that the charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will break directly; The ammeter for testing current can only be connected in series with the 5V input terminal of the charging board
14
Image
HiLetgo 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection B... Read Review

View at Amazon

Product Highlights

  • 14.8V 4S 30A 18650 Li-ion Lithium Battery BMS PCB Integrated Circuits Protection Board Cell Balance.
  • High-accuracy voltage detection circuit, fine workmanship and durable.
  • Working current: 30A .Charging voltage: 16.8V-18V,the best is 17v.Size:56*48*4mm.
  • Main function: Over charge protection, over discharge protection function, short circuit protection function, over current protection function, balance.
15
Image
Ursulan Electric Scooter Battery Charger for eZip 750 E750 400 E400 500 E500 450 900 eZip... Read Review

View at Amazon

Product Highlights

  • Input: 100 ~ 240V , 50~60Hz; Output: 24V 0.6A 36W; Connector Tip:Male 3-Pin XLR Connector (please check it)
  • Compatible Models: Compatible with eZIP 400 (e400 & 400NS), 500 E-500 (e500), 750 (e-750), E-450 (E450), 650 (E650), 900 (e900) Electric Scooter; eZip 4.0, E-4.5 Electric Scooter; eZip Electric Trailz Bike; Ezip Mountain Trailz Schwinn S180, S200, S300, S400, S500, S750 Jazzy Power Chair; Go-Go Elite Traveller (Plus HD) Electric Scooter; Merits S-132 Scooter; Hoveround MPV5 Power Chair; Merits P320 Wheelchair.
  • Tested Units: CE-/FCC-/RoHS Certified for safety, over voltage protection, short circuit protection, over current protection. Made and Sold by professional factory directly
  • Package: 1x Ac adapter/battery Cable charger& 1x Ac power cable/cord.
  • Service: Focus On Providing Quality Power Products and Excellent Customer Service,24 x 7 Email Support and12 Months warranty, 30 Days Money Back Guarantee!Buy with confidence!
16
Image
8PCS 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 18650 Lithium Battery Charging... Read Review

View at Amazon

Product Highlights

  • ❃❃ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground).
  • ❃❃ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
  • ❃❃ The output opens automatically at the first time the load is connected.If the load is less than 50MA, automatically close the output after 30 seconds;If the load is greater than 50MA, the output opens automatically.
  • ❃❃ High Power High Efficiency: Discharge efficiency up to 96%. In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
  • ❃❃ Can be applied to solar panel turning to mobile phone charging, car charging retrofit, driving recorder power supply, household power supply, intelligent plugging transformation, fast charging adapter, etc.
17
Image
ACEIRMC 2pcs 5S 21V 100A BMS Li-ion LMO Ternary Lithium Battery Protection Circuit Board L... Read Review

View at Amazon

Product Highlights

  • high quality 18650 battery charging Module
  • BMS 100A LMO Ternary Lithium Battery Protection Circuit Board Li-Polymer Balance Charging Module Battery Overcharge Protection Circuit
  • Single cell battery overcharge protect voltage : 4.21-4.29 V
  • Single cell battery overcharge protect recover voltage : 4.14-4.24V
  • Overcharge protect Current : 100A
18
Image
54.6V 2A Power Supply Adapter Charger for 48V Lithium Li-ion Battery Pack with DC 5.5x2.1m... Read Review

View at Amazon

Product Highlights

  • Input: 100-240Vac, 1.5A; Output: 54.6V 2A
  • Connector size: DC plug 5.5*2.1mm and 5.5*2.5mm
  • Charger for 13 Series 13S 48V Lithium Li-ion Li-poly battery.
  • Indication Light: Red Light when charging, Green Light when fully charged
  • Security Protection: OVP(over-voltage protection)/OCP(Over current protection)/Overload protection/ Short-circuit protection.
19
Image
ACEIRMC 2pcs 5S 18V 100A BMS Li-ion LMO Ternary Lithium Battery Protection Circuit Board L... Read Review

View at Amazon

Product Highlights

  • high quality 18650 battery charging Module
  • BMS 100A LMO Ternary Lithium Battery Protection Circuit Board Li-Polymer Balance Charging Module Battery Overcharge Protection Circuit
  • Single cell battery overcharge protect voltage : 4.21-4.29 V
  • Single cell battery overcharge protect recover voltage : 4.14-4.24V
  • Overcharge protect Current : 100A
20
Image
Rhinowalk Foldable E-scooter Carrying Bag Portable Electric Scooter Storage Bag Transport... Read Review

View at Amazon

Product Highlights

  • ✔ MATERIAL -- This e-scooter bag is made of high quality 600D nylon fabric, lightweight, durable and waterproof.
  • ✔ SIZE -- Scooter case's unfolded size: 48.8" x 8.7" x 18.1" (124 x 22 x 46 cm). Small storage bag's ize: 8.3" x 10.6" (21 x 27cm).
  • ✔ MULTIPLE CARRYING METHODS -- Designed with length adjustable shoulder straps, you can carry this electric scooter carrying bag as handbag, shoulder bag or a backpack.
  • ✔ SUITABLE FOR -- This e-scooter bag is suitable for XIAOMI M365 and most other electric scooter models on the market.
  • ✔ NOTE -- The handlebar needs to be exposed outside of this bag when storing your off-road electric scooter.
21
Image
Anmbest 5PCS 1S 3.7V 4A 18650 Charger PCB BMS Protection Board for Li-ion Lithium Battery... Read Review

View at Amazon

Product Highlights

  • HIGH-ACCURACY, HIGHLY DURABLE: High-accuracy voltage detection circuit, fine workmanship and durable, Effective life greater than 50000 hours.
  • MULTIPLE PROTECTION: Over-discharge protection, overcurrent protection, overcharge protection, short circuit protection; A combination of 4 safety features that work together to provide ultimate protection for your devices, your chargers and most importantly:you.
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
  • WIDELY APPLICATIONS: Use for variety of capacities and various shapes 3.7V lithium batteries,Massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
  • ATTENTION: Strictly according to the diagram wiring: B+: connected battery positive, B-: connect to battery negative, P+: connection charge / discharge positive, P- connection charge / discharge negative, Otherwise it will cause damage to the chip. After connection,it need to first charge activation, then will have the output.
22
Image
3 Pcs MELIFE 6S 15A 24V PCB BMS Battery Protection Board for Li-ion Lithium 18650 Battery... Read Review

View at Amazon

Product Highlights

  • High Quality: High-accuracy voltage detection circuit, fine workmanship and durable.
  • Multiple Protection: Over-discharge protection, overcurrent protection, overcharge protection; Short circuit protection; High charge and discharge current.
  • Great Design: Compact size and light weight, disconnect load self-recovery.
  • High Efficiency: Low internal resistance, high power MOS. MOS transistor can control the battery charge and discharge, low standby current consumption.
  • Widely Applications: Use for variety of capacities and various shapes 12V/24V lithium batteries, massager battery pack, LED light backup power supply, solar street light battery pack, monitor standby power supply, etc.
23
Image
Organizer 2pcs 4S 40A Li-ion Lithium Battery 18650 Charger PCB BMS Protection Board with B... Read Review

View at Amazon

Product Highlights

  • High Quality; Compact size and lightweight;High-accuracy voltage detection circuit; fine workmanship and durable; stable performance.
  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
  • Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit).Besides, it can use for electric drill with starting current below 80A and power below 135W .
  • 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protection Circuit Balance Charging Module for Drill Motor Motorcycle Battery
24
Image
ACEIRMC 2pcs BMS 5S 21V 18650 Li-ion Lithium Battery Protection Circuit Charging Board Mod... Read Review

View at Amazon

Product Highlights

  • Single Cell overcharge protect voltage: 4.23 - 4.28V;Single Cell overcharge rotect recover voltage: 4.08 - 4.18;Overcharge protect delay: 0.5 - 1.5S;Single Cell over-discharge protect voltage: 2.72 - 2.88V;Single Cell over-discharge rotect recover voltage: 2.9 - 3.1V;
  • Overcharge protect current: 60A;Over-discharge protect current: 60A;Over-discharge protectdelay: 0.5 - 1.5S;
  • Charging voltage : 12.6V for 3S BMS board,16.8V for 4S BMS board,21V for 5S BMS board.
  • This protection board adopts mature protection circuit, special IC, imported high current ultra low internal resistance MOS (single MOS internal resistance as low as 3 milliohms), and has perfect and stable charging and discharging protection functions.
  • Before installing the protection board, the battery must be matched well (the voltage difference between each battery is not higher than 0.05V, the internal resistance is not more than 5mΩ, the difference of the capacitance is less than 30mAh), the better the battery consistency, the longer the battery life, and the best performance of the protection board.
25
Image
2Pcs 3S 11.1V 12.6V 25A W/Balance 18650 Li ion Lithium Battery PCB Protection Board Read Review

View at Amazon

Product Highlights

  • Over voltage range: 4.25-4.35v ± 0.05v; Over discharge voltage range: 2.3-3.0v ± 0.05v
  • Maximum operating current: 0-25A ;Maximum transient current: 34-40A
  • Wiring:(please check the picutre 3 wiring diagram)Strictly according to the diagram wiring: 0V(B )3.7V(B1)7.4V(B2)11.1V(B+), Do not deliberately short circuit. After the line is connected, Need to charge first, then have output.
  • When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not same, please fill in each set of batteries and then use. Do not mix the good battery and the battery.
  • Attention: Do not mix the good battery and poor battery to use. The internal resistance of 3 battery capacity are closer will be better.
26
Image
Charger for Bird & Lime Charger 42V 2A - Bird, Lime, Lime-S, Skip, Spin Xiami M365 - Charg... Read Review

View at Amazon

Product Highlights

  • POWER SPECS:AC 100-240V, 50/60 Hz.
  • 100% compatibility Fits Xiami Scooter Mijia M365,Segway Ninebot ES1 ES2 ES4,Bird, Lime, Lime-S, Skip, and Spin
  • Made of only the highest quality materials and built to last! Our chargers are gauranteed to match the original brand name chargers' quality.
  • Our chargers are made of the highest quality materials available. have tested safe, featuring circuit overload and over voltage protection to meet the safety and EMC requirements, EN55022, CLASS B, FCC Part 15, EN61000. GB4943, UL1950, EN60950, CE,CCC This charger has recevied safety approvals CCC/GS/UL/CE/FCC/PSE/KC/SAA/PSB/LVD/CB/ROHS
  • Package includes: 1x Board Bros Charger + 1x US Wall Plug .We offer 12 months warranty and 24 hours services everyday, any question, please kindly contact us.
27
Image
HiLetgo 5pcs DC-DC Buck Step Down Module 6-24V 12V/24V to 5V 3A USB Charger Module Read Review

View at Amazon

Product Highlights

  • USB Charger Module
  • DC-DC Module
  • 6-24V 12V/24V to 5V 3A
28
Image
54.6V 4A Charger Electric Bike Charger 48V / Li-ion Battery Charger 48V Charger 48V Scoote... Read Review

View at Amazon

Product Highlights

  • Output: 54.6V 4A; Input:100-120Vac, 50 ~ 60Hz，The plug is as shown in picture 1/Provide 2* Fuse and 1* US standard power cable
  • If the product is not satisfied, please contact the seller and give you a satisfactory solution.
  • Aluminum Shell,LED Indicator light,Beautiful and Durable
  • Aluminum Shell, Durable and cooling faster
  • Over voltage Protection, Over Current Protection, Short Circuit Protection, Reverse Protection
29
Image
Onyehn 2pcs DC 12V-36V Voltage Protection Module Digital Low Voltage Protector Disconnect... Read Review

View at Amazon

Product Highlights

  • Board Size: 57 X 42 X 19mm/2.24 X 1.65 X 0.75inch(L*W*H), Input Voltage Range: DC12-36V, Control Accuracy: 0.1V, Power Consumption: <1.5W, Maximum Amperage before Breaker Trips: 20A.Package Included:2x Protection Module.
  • Programmable battery low voltage disconnect switch for DC12-36V lead acid battery and lithium ion battery. It's a protection switch module, not included batteries itself.Compatible Battery: lead acid, lithium ion battery, solar panel battery
  • On-board momentary push button to set the low voltage disconnect parameter and 3 digit red LED display the parameter easy to operation.When the battery voltage reach the setting values, the module will disconnect load automatically to aviod the battery from over discharging to prolong the battery lifetime. Reference formula: charging voltage = rated voltage x 1.2; charging current = rated current x 0.2
  • Reset:When the power is off, press and hold the two buttons at the same time, and then power on. At this time, the screen displays "888", indicating that the factory settings are restored.The factory-set protection value: 12V, difference value: 2V. Difference Value"is the value between the battery voltage to disconnect and the battery voltage to reconnect.
  • Display is accurate, the switch module is quickly to open and close when near minimum voltage; Settings is stored non-volatile, it can keep set when power off
30
Image
Beffkkip 4pcs 2A 5V Charge Discharge Integrated Module 3.7V/4.2V PCB Board Module for 1865... Read Review

View at Amazon

Product Highlights

  • 4 in 1 Charging + Discharging + Lithium Battery Protection + Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
  • MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
  • In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
  • The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on.
  • Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
31
Image
MakerFocus 6pcs 2A 5V Charge Discharge Integrated Module 3.7V 4.2V for 186 50 Lithium Batt... Read Review

View at Amazon

Product Highlights

  • ★ MCU users, if you accept a small load KEY can be connected to the microcontroller about 20s to provide a low level allows the module to continue working. Trigger mode: low level trigger (ground)
  • ★ 4 in 1 Charging / Discharging / Lithium Battery Protection / Battery Level Indicator Module. Lithium battery protection function: over-current, overvoltage, over-temperature, short circuit protection.
  • ★ In discharge mode (The charging mode KEY function is invalid), trigger the KEY port once to open the output; continuously trigger the KEY port twice to close the output.
  • ★ The first time the load is connected, the output is automatically turned on. If the load is less than 50MA, the output will be automatically turned off after 30 seconds; if the load is greater than 50MA, the output will be automatically turned on.
  • ★ Allow discharge while charging. (Note: At this time output voltage 4.7 / 5V)
32
Image
HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board TP4056 Lithium Battery Charging B... Read Review

View at Amazon

Product Highlights

  • HiLetgo 10pcs 5V 1A 18650 Lithium Battery Charging Board
  • Input Voltage: 5V
  • Charging cut-off voltage: 4.2V ± 1%
  • Maximum charge current: 1000mA
33
Image
KOOBOOK 10pcs 3A BMS Protection Board with Solder Belt for 1S 3.7V 18650 Li-ion Lithium Ba... Read Review

View at Amazon

Product Highlights

  • With over charge, over discharge, short circuit, over current protection function, for a variety of different shapes of 3.N capacity lithium batteries.
  • Suitable for many requirements of high integration, low cost occasions.
  • Can meet the performance requirements of many aspects, to ensure, the absolute safety of the battery group.
  • Low current consumption,stable performance.
  • Strictly follow the diagram wiring, do not intentionally short-circuit! After the line is connected, you need to charge first, then there will be output.
34
Image
HiLetgo 2PCS DC-DC Power Buck Module 6V-32V12V24V to QC3.0 Fast Charging Single USB Chargi... Read Review

View at Amazon

Product Highlights

  • Input voltage range: 6V-32V
  • Output voltage: default 5V, automatic adjustment between 3-12V after fast charge
  • Supports multiple fast charging protocols
  • Output overcurrent and short circuit protection
  • Over temperature protection
35
Image
CHENBO 10 Pcs 5V Micro USB 1A 18650 TP4056 Lithium Battery Charging Board with Protection... Read Review

View at Amazon

Product Highlights

  • Charging cut-off voltage: 4.2V ± 1%
  • Maximum charge current: 1000mA
  • Input voltage: 5V
  • Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.
  • Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery
36
Image
Comidox 3S 12V 10A 18650 Lithium Battery Protection Board BMS Li-ion Charger Protection Mo... Read Review

View at Amazon

Product Highlights

  • The power range described is applicable to the following products: vacuum cleaner, massager battery pack, LED light backup power supply, 12V electronic products, solar street light battery pack, monitoring standby power supply, etc.
  • With overcharge, over discharge, over current, short circuit and other protection functions, for a variety of shapes of various shapes 3.7V lithium battery.
  • High quality MOSFETs such as VISHAY, AOS, IR, etc., FR-4 low temperature coefficient sheet, well designed and tested.
  • It is small in size and suitable for many applications requiring high integration and low cost. It can meet various performance requirements and ensure the absolute safety and reliability of the battery pack.
  • This protection board can not be used for iron ion polymer battery, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, 2 pieces and 24V series, 775 (4A) or above motor, 1W fisheye LED lamp.
37
Image
Triple Protection Bracelet For Protection Bring Luck And Prosperity Hematite Black Obsidia... Read Review

View at Amazon

Product Highlights

  • 【Size】The bracelet with elastic cord; These 10mm natural stones are strung on a very sturdy durable 7.8" long stretch . Elastic Band made to fit MOST people
  • 【Material】Hematite+Black Obsidian+Tiger’s Eye，Natural material for long-lasting beauty，Give unique temperament.
  • 【Design Concept】colorful design Black Obsidian Hematite Tiger Eye Beads for Lovers to quickly fallen in peaceful and romantic emotion.
  • 【Target Audience】Unisex,Chain Type:Beaded Bracelet,Compatibility:All Compatible
  • 【Packing】Each order will use a beautiful and both environment-friendly package
38
Image
MakerFocus 4pcs 186 50 Charging Board Dual USB 5V 2.4A Mobile Power Bank Module 186 50 Lit... Read Review

View at Amazon

Product Highlights

  • ★ ★ ★ Note: The positive pole of the battery is connected to B+ and the negative pole is connected to B-, do not reverse it. If it is reversed, it will burn out!!!!
  • This module is a portable backup power supply with an input that matches the 5.0V adapter to charge the internal battery. Use built-in battery for portable device to provide 5.0V/3.0A USB2.0 supply output for external devices.
  • Protection: overcharge protection, overdischarge protection, short circuit protection, constant current.
  • Charging cable: support three USB data cable charging, including Iphone and Android.
  • Size: 6.5 * 2.5 * 0.1cm; Dual output current: 5V 2.4A; Input voltage B+ to B-: 3.0 - 4.2V.
39
Image
2Pack Enhanced 4S 40A 16.8V Li-ion Lithium Battery Protection Board PCB BMS Charger Protec... Read Review

View at Amazon

Product Highlights

  • High Quality; Compact size and lightweight;High-accuracy voltage detection circuit; fine workmanship and durable; stable performance.
  • Multiple Protections: Over-discharge protection, overcurrent protection, overcharge protection; High charge and discharge current
  • LOW STANDBY CURRENT: MOS transistor can control the battery charge and discharge, low standby current consumption.
  • Applications:It is suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, no size limit).Besides, it can use for electric drill with starting current below 80A and power below 135W .
  • If you want to start the drill successfully, it requires 3pcs15C-20C power batteries, or 6pcs10C-15C power batteries (Note: ordinary 18650 battery can not start the drill!! Recommended power battery models: SONY VTC4, VTC4A, VTC5A, VTC6). About connecting cables, we suggest using more than 3 square millimeters copper wire, and can not use nickel plate!
40
Image
42V 2A Charger Power Fast Adapter Smart Universal Power Supply DC 1-Prong Port for 36V Lit... Read Review

View at Amazon

Product Highlights

  • Input: 100-240VAC,50/60Hz, Output: 42V 2A Power Max: 84W
  • Security protection: OVP(Overvoltage protection)/OCP(Overcurrent protection)/ OLP(Overload protection)/ SCP(Short-circuit protection)
  • 42V 2ACharger, red light means charging, green light means charge full or disconnect
  • Faster and safer charging with our adapter, Intelligent high-speed charging.
  • 42V Charger is only suitable for 42V / 36V versions scooters batteries and not for 24V batteries or lower.
  • Charger Plug Size:5.5mm(0.21in)x2.1mm(0.08in)x10mm(0.39in)
  • CC-CV working mode optimize the life span battery Auto-stop when full charged.
  • Eco-friendly, High efficiency, light weight, Heavy duty.
  • The case maded of Fireproof ABS friendly to the environment.
  • If you are not satisfied with our product, let us know and you will be offered a full refund or replacement. Enjoy this absolutely RISK FREE purchase by clicking the yellow Add to Cart button.
41
Image
MakerFocus 10pcs TP4056 Charging Module with Battery Protection 18650 BMS 5V Micro USB 1A... Read Review

View at Amazon

Product Highlights

  • The instructional video is available in the product guide and document. The input has a MICRO USB female connector, which can be directly input as a mobile phone charger to recharge the lithium battery, and the input voltage wiring pad is also reserved, which can be very convenient for DIY
  • Charging cut-off voltage: 4.2V ± 1%; Maximum charge current: 1000mA
  • Input voltage: 5V; Battery over-discharge protection voltage: 2.5V; Batteryovercurrent protection current: 3A; Connect the battery to the B + B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full
  • The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly
  • We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation
42
Image
Power Adapter Female DC Port Inline Connector for 36V Electric Bike Lithium Battery Charge... Read Review

View at Amazon

Product Highlights

  • Input: 100-240VAC,50/60Hz,1.5A,Output: 42V 2A Power Max: 84W. Model Number: HK-42-2000
  • Output interface：Female DC interface（outside diameter of 5.5 mm; inner diameter of 2.1 mm）
  • 42V 2A, red light means charging, green light means charge full or disconnect
  • Four Protection design: 1,Short circuit protection; 2,Battery polarity error protection; 3, Over current protection; 4,Over voltage protection
  • Brand New Replacement Product, works as genuine parts, 100% OEM Compatible! US Power cord included
43
Image
Segway-Ninebot External Battery Pack for ES1/ES2/ES4 Electric Kick Scooters Read Review

View at Amazon

Product Highlights

  • Versatile Fit: The Segway battery is compatible with the Segway Ninebot ES1, ES2, and ES4 Kick Scooters, bringing more fun and convenience to your travel.
  • More Energy Power & Safety: The Segway battery is designed with trusted materials and a portable design with four times power capacity. This battery does not contain harmful metals like cadmium, lead, or mercury.
  • Smart Battery Management System: The Segway battery has four types of protection - over-heating, short circuit, over-current and over-charge protection. It is a lithium core 187Wh battery with rated output power 720W.
  • User Friendly: The Segway battery is easy to install and nearly doubles the max range of the ES1 and ES2 from 15.5 miles to 28 miles respectively. It also increases the max speed of the ES1 and ES2 to 15.5 mph and 18.6 mph respectively.
44
Image
24V 2A New XLR Electric Scooter Battery Charger for Go-Go Elite Traveller Plus HD US, Ezip... Read Review

View at Amazon

Product Highlights

  • Brand New Replacement Product, works as genuine parts, 100% OEM Compatible!
  • Input: AC 100-240V 50/60Hz; Output: DC 24V 2A, faster charge than 24V/1A, 24V/1.5A, 24V/1.8A.
  • Short Circuit Protection fits widely : LED Display Green: Charged OK, Red: Charging. Male 3-Pin XLR, 3.9ft US Power cord included.
  • Well-known compatibility with: eZip Mountain Trailz/eZip Trailz Men's/eZip Trailz Women's/eZip 4.0/eZip 400/eZip 500/eZip 750 /eZip 900.
  • Please Note : To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. You are not satisfied with our products for any reason. Or if you have any questions, please feel free to tell me, we will be very happy to help you.
45
Image
Onyehn 10Pcs 5V Boost Step Up Power Supply Module Lithium Battery Charge Protection Board... Read Review

View at Amazon

Product Highlights

  • Built-in charge and discharge power MOS;The existing power management chip on the market all are HOTCHIP HT4928S which the parameters is same as134N3P
  • Charge status indication. Red light flashes when charging; Long red light when full
  • The step up charging board can be connected to a lithium battery and connected in multiple sections of lithium batteries, as long as the voltage is 3.7-4.2V in parallel(only be connected in parallel, not in series)
  • Available for various batteries like Polymer ,18650 Lithium ,Cell Phone ,Tablet and MP3 Battery
  • it has protection functions, protect from over-charger / over-discharger/ over-load ( support charger and discharger at the same time )
46
Image
Segway Ninebot S Smart Self-Balancing Electric Scooter with LED light, Portable and Powerf... Read Review

View at Amazon

Product Highlights

  • Safety Priority : UL 2272 certification ensures Ninebot S meets high standards for fire and electrical safety. The Smart Battery Management System provides reliable battery performance. IP54 waterproof protection ensures operation in various weathers.
  • Sturdy & Powerful : Ninebot S is compact, weighting just 28 lbs with a max load of 220 lbs. Thanks to the dual 400W motors, it can easily reach a max speed of 10 mph. A single fully charged battery can run up to 13. 7 miles, climbing a max slope of 15°
  • Road Adaptive Design : 10. 5" pneumatic tires provide a comfortable and smoother ride on bumpy roads. Knee control bar allows for precise steering and easy lifting. Applicable Age 16 – 50 years. Applicable Height - 3. 11 – 6. 6 Inch. Operating temperature-14-104°F(-10-40°C)
  • Intelligent App Management : Download the Segway app for anti-theft function, speed limit and adjustment, vehicle self-diagnose, firmware upgrade, Ambient Light, vehicle remote control and more.
  • Quality Assurance: The Ninebot S is sturdy and durable. One-year or 180-day for different parts, please refer to information in product details below, contact us at technicalsupport@segway if you have any problems.
47
Image
diymore 5pcs TP4056 Type-C USB 5V 1A Battery Charger Module Charging Board with Dual Prote... Read Review

View at Amazon

Product Highlights

  • Input interface: Type-C USB.
  • Battery overcharge lifting voltage: 4.00 V
  • Battery: over-current protection current 3 A
  • Maximum charging current output: 1000 ma
  • Light state: no load the light not bright, red light for recharging, is full of blue light.
48
Image
WMYCONGCONG 10 PCS 5V 1A Boost Step-Up Power Supply Module Battery Charge Protection Board... Read Review

View at Amazon

Product Highlights

  • Charge and discharge status indication. Red light flashes when charging; Red light is always on when full; Blue light flashes when discharging.
  • Input Voltage: 3.7V-5.5V; Output Voltage & Current: 5V 1A.
  • Internally installed charging and discharging power MOS.
  • Integrated charge management and discharge management. Supports trickle mode and zero voltage charging.
  • Intelligent temperature control and over-temperature protection; Integrated output overvoltage protection, short circuit protection, overload protection; Integrated over-charge and over-discharge protection.

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

JUMP TO [Show]

Battery Protection Circuit Board For E-Scooter

Must Reads

Cbd Oil Cannabidiol For Pain

Cbd Oil For Dogs

Cbd Cream For Pain Relief

Cbd Oil For Anxiety

Cbd Oil For Pain

Cbd Oil Cannabidiol For Pain 1000 Mg

Cbd For Dogs

Cbd Gummies For Pain And Anxiety

Cbd Oil For Sleep

Cbd Oil For Cats

Citizen Watches For Women

Movado Watches For Women

Kids Hoverboards

Epikgo Hoverboard

Hoverboard Cart

Pink Hoverboard

Hoverboard Battery

Hoverboard Seat

Hemp Oil For Pets

Headphones For Kids

  1. Home
  2. Battery Protection Circuit Board For E-Scooter

"Amazon, Amazon Prime, the Amazon logo and Amazon Prime logo are trademarks of Amazon.com, Inc. or its affiliates". AS AN AMAZON ASSOCIATE, WE EARN AFFILIATE COMMISSIONS FROM QUALIFYING PURCHASES.

Copyright © 2025 Shopper.reviews.